Browse Products by
-
Product Line
-
Industry
-
Electronics and Signal Analysis
+
-
Fiber Optics and Accessories
+
-
Imaging, Cameras and Displays
+
-
Lasers, Laser Systems and Accessories
+
-
Light Sources
+
-
Materials and Chemicals
+
-
Optical Components
+
-
Optical Manufacturing and Design
+
-
Positioning and Motion Control
+
-
Sensors, Detectors and Components
+
-
Services, Publications and Software
+
-
Test and Measurement Equipment
+
Testimonials
"With a limited budget, I need to identify internet marketing channels that are unique and not the traditional industry websites. Photonic-Sourcing presents my company to potential buyers in a dynamic and interactive format that immediately generated interest in our products.[...]"
Read full testimonial »Ktp Crystal
Laserstec Inc >>Description
KTP (Potassium Titanyl Phosphate, KTiOPO4)
KTP has many favorable features that enable it to be widely used for frequency mixing for Red/Green/Blue output, and for OPO and OPA for visible to mid-infrared tunable output. It is also used for many E-O devices such as optical waveguides, optical switches, directional couplers and E-O modulators.
KTP Crystal has the following exceptional properties that make it a very important nonlinear crystal:
Large nonlinear optical coefficient
Wide angular bandwidth and small walk-off angle
Broad temperature and spectral bandwidth
High electro-optic coefficient and low dielectric constant
Large figure of merit
Nonhydroscopic, chemically and mechanically stable
High thermal conductivity
Low cost compare with BBO and LBO
KTP is a positive biaxial crystal, with the principal axes X, Y, and Z (nz>ny>nx) parallel to the crystallographic axes a, b, and c, respectively.
| Product line: | Lasers, Laser Systems and Accessories |
|---|---|
| Subcategories: | Laser Cavities | Laser Components SolidState | Laser Diode Modules | Laser QSwitches | Laser Rods and Other Amplifying Materials | Laser Slabs |
Related products
Description :
The newest SANYO laser diodes, from 405nm to 830nm are specified individually. The range includes high power diodes for use with CD-R, industrial laser diodes at 635nm, 808nm laser diodes for use as a...
Description :
These diode lasers are compact single frequency light sources with a sub-MHz linewidth (in cw mode). A modulation input can be requested. Available wavelengths for standard products are in the range o...
Description :
These high brightness fiber coupled laser diodes are available with output fiber sizes of 200um, 400um, and 600um with output powers of up to 400W CW. The wavelengths available are 785nm to 1064nm. Th...
Description :
Jenoptik, a world leader in laser technology, offers Di-water microchannel cooled stacks in 1 to 25 bar configurations with output power up to 3,000W CW. Output powers of up to 120W CW and 300W QCW pe...










