Download our Media Kit

 

Products from Optical Components
[1]   2  3  4  5  6       »|
Company Name Product/Service Name Description
DeLn Optics Co.,Ltd.
RTP Q-Switch RTP Q-Switch
RTP (Rubidium Titanyle Phosphate – RbTiOPO4) is an isomorph of KTP crystal which is used in nonlinear and Electro Optical applications. The electrochromism is not observed under a &nbs
DeLn Optics Co.,Ltd.
HGTR KTP HGTR KTP
High Gray Track Resistance (HGTR) KTP for CW and high average power SHG HGTR KTP crystals have gray track resistance sufficiently greater that typical flux grown KTP. This is possible due to adva
Alternative Vision Corporation
Optec C0810 50mm SWIR lens Optec C0810 50mm SWIR lens
The Optec Type C0810 lens has a 50 mm focal length, a maximum aperture of f/1.4 and a selection of lens mounts - Nikon F, Canon FD, M42 thread and C.  The C0809 is intended for use in the SW
Optical Fiber Systems Inc
diode module QFC-0808-120 diode module QFC-0808-120
Fiber coupled laser diode module delivering up to 150W out of a 2.4mm / 0.12NA fiber at 808nm. The module incorporates 5 diode bars with a Peletier elements (TEC) for each diode bar.
Optical Fiber Systems Inc
SPCO-2808-3011-F-500 SPCO-2808-3011-F-500
Fiber coupled laser diode module, delivers up to 30W cw out of a 1.1mm / 0.12NA fiber at 808nm. Our fiber coupled laser diode module is a drop-fit replacemnt for the Spectra Physics laser diode module
Optical Fiber Systems Inc
SPCO-1808-1511-F-500 SPCO-1808-1511-F-500
Fiber coupled laser diode module, delivering 15W at 808nm out of a 1.1mm / 0.12NA fiber. Our module is a drop-fit replacement for the Spectra-Physics modules.
Technodesign Ltd
GaP (gallium phosphide) crystals and wafers for LED GaP (gallium phosphide) crystals and wafers for LED
GaP (gallium phosphide) crystals and wafers for  red, orange and green light-emitting diodes (LED) diameter 10 - 110 mm, (standard for wafers 50.8 mm, 76.2 mm) thickness 250 - 1000 microns
Laserstec Inc
Achromatic Lenses Achromatic Lenses
Achromat consists of a positive low-index Crown Glass lens element cemented to a negative high-index Flint Glass lens element. The elements are chosen so as to cancel chromatic aberration at two well-
Laserstec Inc
KTP crystal KTP crystal
KTP (Potassium Titanyl Phosphate, KTiOPO4)KTP has many favorable features that enable it to be widely used for frequency mixing for Red/Green/Blue output, and for OPO and OPA for visible to mid-infrar
Laserstec Inc
BBO crystals BBO crystals
Beta-Barium Borate (β-BaB2O4,BBO) Lasertec BBO crystal is grown with CZ technology. CZ method grown BBO is better than usual Flux grown BBO with better homogeneity,no inclusion and lower def
[1]   2  3  4  5  6       »|