Photonic Sourcing

The Series OLS10KD range of high voltage power supplies recognises the requirement for high stability and very low ripple over a wide range of output voltages.
This is achieved by combining the high power, 10kW supply with a low power, 1kW supply in the same chassis. The outputs of these are coupled together so that either can be used. For high voltages, usually above 10% of the maximum, the High Energy (HE) supply is used; for voltages below 10% the Low Energy (LE) supply is used. The LE supply has superior ripple and regulation at the lower voltages and maintains this down to a few hundred Volts or less.
The Series OLS10KD meets the exacting requirements found in electron and ion beam systems, ion implantation and X-ray systems. Designed using the latest power switching IGBTs to ensure efficient and reliable operation over the full operating range, the Series OLS10KD will give exemplary performance in the most severe of electrical environments. The Series OLS10KD achieves an exceptionally high packing density for high voltage power supplies of this power level, giving 169W/Litre, 2.7W/inch3. The 6U construction allows operation at full power when close-mounted in a standard equipment rack, giving significant savings in rack space in large systems. Many components are common between the HE and LE supplies, minimising the space required for the dual configuration. Featuring HiTek Power’s unique Arc Count and Extinguish (ACE) system for managing systems where load arcing is endemic, the Series OLS10KD protects both itself and the load from damage that may be caused by excessive arcing whilst allowing normal operation to continue. The Series OLS10KD features both analogue and remote control (optional RS232) interfaces. A full set of commands is available over the RS232 interface to control and monitor the operation of the power supply.