Browse Products by
  • Product Line

  • Industry

Testimonials

"With a limited budget, I need to identify internet marketing channels that are unique and not the traditional industry websites. Photonic-Sourcing presents my company to potential buyers in a dynamic and interactive format that immediately generated interest in our products.[...]"

Read full testimonial »

Al Cheswick
VP Sales and Marketing
Krell Technologies

Home» Products »

SERIES LR DC-DC Converters

Series Lr Dc-dc Converters

Pico Electronics, Inc. >>

Description

Wide Input Range/up to 3.33:1
Isolated Regulated up to 5 Watt
DC-DC Converters
Fully Regulated
All Units Shielded

This series of high efficiency, wide input range, encapsulated regulators come in 90 different models. These units feature a 500 VOLT DC input to output isolation in both single and dual output models. The LR Series will operate over a temperature range of -25º C to +70º C with no heat sink or electrical derating. These units are excellent for applications where input voltage varies dramatically, yet a high efficiency and output voltage regulation must be maintained.

Typical Characteristics:

  • Test conditions: 25º C ambient.
  • Operating temperature: -25º C to +70º C ambient.
  • Output voltage tolerance: ±1% at typical input voltage
  • Output voltage temperature coefficient: 0.02%/ºC
  • Storage temperature: -55º C to +125º C
  • Short circuit protection: Temporary
  • Operating frequency: 40 KHz, typ.

Options Available

  • Per Mil. Std. 883
  • Expanded operating temp. (-55º C to +85º C)
  • Stabilization Bake (125º C ambient)
  • Temperature Cycle (-55º C to +125º C)
  • Hi Temp, full power burn in (100% power, 125º C case temp)

Features

  • Encapsulated semiconductors, conservatively rated for maximum reliability.
  • Load regulation (see table for typical variation at different loads)
  • Line regulation = Typical values
  1. 5-15V DC = ±1.5%
  2. 8-24V DC = ±1.5%
  3. 18-36V DC = ±1.0%
  4. 36-60V DC = ±1.0%
  5. 18-60V DC = ±1.5%
  • High efficiency - up to 80%
  • Will operate over a temperature range of -25º C to +70º C with no heat sink or electrical derating
  • 6 sided shielding
  • Isolation - 100 megohms at 500 volts DC
  • External output trimming pin standard, +5%
  • Single and dual isolated outputs
  • Each unit is supplied with an external control pin. This "C" pin, when connected to the negative (-) input, will disable the unit, allowing for remote shutdown.

Product line: Electronics and Signal Analysis
Subcategories: Power Converters
Related products
Light Bulbs for every Application
Light Bulbs for every Application

Description :

Since 1984 Specialty Bulb has been supplying Any Lamp For Any Use. We are a highly specialized stocking distributor for the major lighting manufacturers worldwide.

Gold Plated Bellows for High Frequency Interconnection
Gold Plated Bellows for High Frequency Interconnection

Description :

Gold Plated Bellows for High Frequency Interconnection Servometer® – PMG, LLC introduces Gold Plated Bellows Contacts, an alternative to spring loaded type test pins for the next genera...

Lasiris TMFL laser
Lasiris TMFL laser

Description :

StockerYale Lasiris T-MFL produces long telecentric lines as thin as 9.0 µm 1/e2 at a specified working distance and is designed for applications where utmost accuracy and precision are required...

Fuji CP6-4000 Chip Shooter for SMD assembly
Fuji CP6-4000 Chip Shooter for SMD assembly

Description :

Fuji CP6-4000 chip placer sn 800 MFG DATE MAR 1995 18,438 hrs FUNCTIONAL CLEAN AND PAINTED – PLACING PARTS Following upgrades have been done: - All rod ends have been replaced wit...

Products from the same company
Banner Banner

Events

SPIE Defense Security Sensing CLEO Conference SPIE Optifab

Corporate Member

SPIE OSA