Submitted by
AMWEI Thermistor
NTC Thermistor can be assembled in housing in a variety of configurations for temperature sensing, measurement, detection, indicator, monitoring and control. Thermistor temperature sensor probe assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature.The choice of assembly is dependent on the application. The primary factors which determine the optimum configuration of a thermistor assembly are the operating environment, mounting, time response and minimum dissipation constant.The two factors which do vary considerably with thermistor sensor probe assembly design are time constant and dissipation constant. The time constant will typically be of greater duration in encapsulated thermistors. This is, of course, due to additional mass surrou...
-
Submitted by
Optical Fiber Systems Inc
Our KLS-1060-010 is a diode laser system delivering up to 10 W of optical power at a wavelength of 1060 nm out of a small optical fiber. The system includes a pigtailed laser diode, driver and control electronics as well as a TEC cooling module with temperature control. The laser energy is delivered out of a small detachable optical fiber with a 0.6 mm diameter and 0.22 Numerical Aperture. The unit is controlled by an internal microprocessor with a remote hand-held interface. The system can also be controlled by an external computer....
-
Submitted by
INOS
Fits all models of ICP and ICP-MS spectrometers.Top level efficiency of aerosol productivity (50-90%) resulting in 3-4 times boosted aerosol mass reaching plasma torch per time unit.Analyte consumption reduced tenfold.Sensitivity increased 5 times in comparison to classic pneumatic nebulizers.Insensibility to sample contamination (small crystals, residue).Allows working with very high matrix concentration analytes.Washing time less than 60 s (comparable with pneumatic nebulizers).Top quality aerosol (maximum of a drop distribution at 2 μm) Maximal resistance to erosion and contamination (only quartz, polypropylene and teflon parts are exposed to analyte).Integrated internal water cooling system.Provided with cyclone spray chambers featuring any connection to plasma torch (radial cut bot...
-
Submitted by
Desert Silicon LLC
4 inch photoluminescent porous silicon wafers are now available for Research & Development in areas including solar, display and medical imaging and treatment...
-
Submitted by
Laserstec Inc
Erbium and ytterbium co-doped phosphate glass has a broad application because of the excellent properties. Mostly, it is the best glass material for 1.54um laser due to its eyesafe wavelength of 1540 nm and high transmission through atmosphere. It's also suitable for medical applications where the need for eye protection may be difficult to manage or diminish or hinder essential visual observation. Recently it is used in optical fiber communication instead of EDFA for its more super plus. There is a great progress in this field. We can also produce erbium laser glass with various ions doping according to your requirement. We have three kinds of Erbium-doped glasses for different use, WM4, Cr14 and EAT14. WM4: Erbium phosphate glass for ion-exchange purpose; Cr14: Erbium phosphate glass for...
-
Submitted by
Suzhou Delphi Laser Co., Ltd
This Dot Matrix Formatting Laser System is specially designed for precision etching on various materials to form required dot matrix. The light guiding plate with dense dot matrix is a very important part of the backlight sub-systems of LCD. Typically, the materials are stainless steel or nickel based alloy. Laser dry etching molding has many advantages over conventional chemical etching, including simple process, high positioning accuracy, high productivity and environmental friendly. SpecificationsLaser operation model: Q-switched Cooling method: Air cooling Max speed: 500 dot/second Dot diameter: 40-80um...
-
Submitted by
Signal Forge
RF Signal Sources Boost Output of Portable Signal Generator to 2.6 GHz The Frequency Expansion Modules are RF signal sources that attach to the SF1000 & SF1010 portable signal generators providing output frequencies up to 2.6 GHz. They are ideal for testing a wide range of advanced wireless applications such as WiFi, Bluetooth, cellular phone, Zigbee and other RF communications equipment, ICs and circuit boards. The modules are controlled by the SF1000 or SF1010 which also provide operating power. The combination of the Portable Signal Generators and the Frequency Expansion Modules creates a small, portable tool for both lab bench and field test applications. The Frequency Expansion Modules are available now directly from Signal Forge. For more information contact Sig...
-
Submitted by
Full Range Enterprise Co., Ltd.
We supply optical Calcite Crystal (Iceland Spar) both in raw material and semi-finished form or finished form (such as polarizers, waveplates, etc.) ready to be used as per customer's dimension or detail technical specified.Typical products are rhombohedral shape, rectangle and round, shaped plate, wedge and cube. The optical calcite crystals are carefully selected to eliminate small inclusions, cleavage planes, cloud and mist, point defects and bubbles inside the crystal. It is known for its properties of transparency and double refraction, used chiefly in the manufacture of Nicol prisms, polarizers, waveplates, wedges, etc., which are essential parts of polarizing components and other special optical instruments.Our Capabilities:Surface Quality: 10/5 Scratch and Dig Dimension tolerance: ...
-
Submitted by
JINAN JINGYI PHOTONICS TECHNOLOGY CO.,LTD.
DKDP crystal is our main product. We also are the only company to produce high-volume deuterium (98.05%-99.05%), high-quality, large-caliber DKDP crystal in China. The largest blank's volume is 16cmx16cmx22cm and No defect inside of crystal. 11. Application‹1.second, third, and fourth harmonic generation of nd:lasers.2. Frequency doubling of dyer laser.3. High power laser frequency conversion materials.4. Shutter of high speed photography.5. Electro-optical modulator and Q switches.As we have our own factories, the price of the crystal is much more reasonable as compared with that in the international market. Welcome to visit our company and inquire for more information. We will take pleasure in approaching and replying for you. If you are interested to our crystal or want to be our...
-
Submitted by
Trion Technology
The Phantom III RIE is designed to supply research and failure analysis laboratories with state-of-the-art plasma etch capability using single wafers, dies or parts using fluorine and oxygen based chemistries. The system has a compact, modular design built on a space-saving platform.Applications: MEMS, Solid State Lighting, Failure Analysis, Research & Development, Pilot Line.For etch processes, features and options visit: http://www.triontech.com/phantom.
htmFor applications visit: http://www.triontech.com/applicat
ions.htm...
-
Submitted by
DeLn Optics Co.,Ltd.
DeLn Optics manufacture and supplies the highest quality windows.The minimum thickness of windows we can process is 0.3mm.BK7/ Fused Silica / CaF2 / Sapphire/ MgF2 / Si /Ge / Znse Windows Specifications Dimension Tolerance: +0.0, -0.1mmThickness Tolerance: ±0.2mmClear Aperture: >80%Parallelism: 1’(Standard), 10”(High Precision)Surface Quality: 60/40(Standard), 10/5(High Precision)Wavefront Distortion: L(Standard), L/10(High Precision) per 25mm @633mmBevel: <0.25mm x 45° ...
New experiments show that it's possible to focus light through opaque materials and detect objects hidden behind them, provided you know enough about the material.Materials such as paper, paint, and biological tissue are opaque because the light that passes through them is scattered in complicated and seemingly random ways. A new experiment conducted by researchers at the City of Paris Industrial Physics and Chemistry Higher Educational Institution (ESPCI) has shown that it's possible to focus light through opaque materials and detect objects hidden behind them, provided you know enoug...
Electronic components that exploit the phenomenon of superconductivity could allow us to study the collective behaviour of large numbers of neurons operating over long timescales. That is the finding of scientists in the US, who have shown how networks of artificial neurons containing two Josephson junctions would outpace more traditional computer-simulated brains by many orders of magnitude. Studying such junction-based systems could improve our understanding of long-term learning and memory along with factors that may contribute to disorders like epilepsy. The human brain consists...
University of Pittsburgh researchers have conducted the first cradle-to-grave assessment of light-emitting diode (LED) streetlights and determined that the increasingly popular lamps strike the best balance between brightness, affordability, and energy and environmental conservation when their life span-from production to disposal-is considered. LEDs consist of clusters of tiny, high-intensity bulbs and are extolled for their power efficiency and clear luminosity.Engineers in the Mascaro Center for Sustainable Innovation based in Pitt's Swanson School of Engineering compared LED streetl...
New laser application centre targets the electronics, photovoltaics and flat-panel display marketsJenoptik has opened the doors to a new laser application centre based in the the southern Korean city of Pyeongtaek. The company has invested $4.4 million (€3.4 million) in the centre, which houses laser processing systems ideal for customers looking to do everything from initial testing through to pilot and small production runs. "This moves our process of internationalization a major step forward," said Jenoptik's chairman Michael Mertin at the opening. "...
Scientists at IBM have used nano-engineering techniques to make the world's fastest "avalanche photodetector". Such devices are used in telecommunications networks and the work is an important advance in the field of optical communications. The photodetector is made using germanium, which is compatible with silicon-chip-making technology and could therefore find use in next-generation high-performance computer systems. Computer processors communicate with each other over millions of tiny copper wires. Scientists would ideally like to use pulses of light instead of electri...
Never Lug A big, Heavy Signal Generator Into The Field Again A battery-powered signal generator is now available from Signal Forge. With the introduction of the SF1020, field test engineers now have the option to leave their large, heavy and expensive signal generators in the lab. The SF1020 is a small, lightweight battery-powered signal generator with a frequency range of 1 Hz to 1 GHz and numerous waveform modulation functions. It is ideal for applications such as building surveys, installation and maintenance of facility-based cellular and wireless networks and a variety of other...
Signal Forge today released a new portable signal generator designed for use with National Instruments LabView© and other automated test environments. The SF1010 Portable Signal Generator with Remote Control, supports the SCPI (Standard Commands for Programmable Instruments) interface, which allows test engineers to quickly add the new portable signal generator to most popular automated test environments including Labview, LabWindows/CVI and HP’s VEE.The SF1010 is a portable signal generator with a frequency range of 1 Hz to 1 GHz which may be extended to 2.6 GHz with add-on F...
|
